Important Shipping Rates Notice

Welcome to The SeaRey Specialist!

Shopping Cart (0 item)

SkyView Transponder

Be the first to review this product

Availability: In stock


Quick Overview

SkyView SV-XPNDR-261 Mode-S Transponders

Pin It

SkyView SV-XPNDR-261 Mode-S Transponder

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • SkyView SV-XPNDR-261 Mode-S Transponder
  • SkyView SV-XPNDR-261 Mode-S Transponder Mounting Tray


SkyView SV-XPNDR-261 Mode-S Transponders:

  • Integrated: Made for the SkyView System with control and annunciation appearing on the SkyView Display. The transponder module can be mounted anywhere in the airplane that is convenient.
  • Traffic: Features TIS Traffic (USA).
  • Meets USA and Europe ADS-B Out Mandates: Note, full ADS-B Out compliance requires a TSO-C146A GPS (WAAS) to be connected. NOTE ON U.S. COMPLIANCE: Currently the FAA ADS-B requirements specify the higher power Class 1 transponder. For U.S. customers, we recommend only the Class 1 SV-XPNDR-261.
  • Dynon Warranty, Support, and Service: These transponders come with a 3-year Dynon Warranty.
SPECIFICATIONS SV-XPNDR-261 For High Performance Aircraft
and ALL US Aircraft
Type Class 1 Mode S
Certification ETSO 2C112b, C166a and TSO C112c, C166a,
approved for IFR and VFR flight
Compliance ED-73B, ED-14F/DO-160F, DO-178B, DO-254 level C,
DO-260A class BO, DO-181C
Supply Voltage (DC) 9 - 33 V
Power Consumption 6 Watts (typical)
(idle:0.15 A, active:0.34 A at14 V)
Transmitter Power 250 W nominal at connector
Operating Temperature -40deg F to +158deg F (-40deg C to + 70deg C)
Cooling Requirement No fan required
Weight 0.9 Lb. (400 g)
Dimensions 2.4” x 1.8” x 5.6” (62 x 45 x 141 mm)
  • Mounting: At only 1 pound and 5.6” by 1.8” by 2.4”, the transponder module can fit into the tiniest places and aircraft. A quick release mounting system allows for simple installation and easy removal if needed for service.
  • Connections: The SV-XPNDR-261 connects to a serial data line on each SkyView Display.
  • TNC Connector: The TNC connector is not supplied by Dynon. Specification: Dual Crimp RG142-400 AMP Male.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.